minus parameters in tp/m: coordinate.

Post all ideas and suggestions for fCraft here
Post Reply
User avatar
Hellenion
Offline
Posts: 220
Joined: October 20th, 2011, 9:20 am
Location: Subnet
Contact:

minus parameters in tp/m: coordinate.

Post by Hellenion »

If tp/m has three parameters, a minus will count as current coordinate for that axis.
marking or teleporting to locations is always a lot of work as you need to type generally about 8 digits, a minus will help a lot here.

example: /m - - 111
effect: a block above or below you will be marked, depending on how high you are. this eliminates the need to type something like /m 211 178 111, which is a lot more work to get right.


Additionally, you could allow for relative marks:
/line
/m - - -2
/m - +10 -2
will draw a line from under your feet to 10 blocks away, doing this in the current configuration requires you to manually count the blocks.

/tp +100 - - makes it easier to move around on large maps.

This would make marking and teleporting so much more powerful, and it should be quite doable.

Requests about fixed-length lines have been made earlier, and I believe this is a great way of introducing it.
A = {x ∈ P(U) | x ∉ x}
Mods:
  1. /Su - Allows players to temporarily become a different rank
  2. /Snap - Like /Line but only draws straight or diagonal lines.
  3. pre-0.630 skip/none block

User avatar
fragmer
fCraft Developer
Offline
Posts: 1386
Joined: May 21st, 2011, 10:53 pm

Re: minus parameters in tp/m: coordinate.

Post by fragmer »

Image

Post Reply