Page 1 of 1
How to make Build to Source Code
Posted: August 30th, 2011, 11:54 am
by zaqquater
Hi there

, as title said. Is it possible to do that ? if yes How ?
thank you
Re: How to make Build to Source Code
Posted: August 30th, 2011, 5:08 pm
by fragmer
It's possible to do, the sources are at
svn.fcraft.net. If you are not familiar with programming, I do not recommend building it yourself.
Unless you plan on modding fCraft, there is no advantage to building your own binaries.
Re: How to make Build to Source Code
Posted: August 30th, 2011, 5:32 pm
by zaqquater
thanks for reply fragmer. but what i mean is the reverse from build to svn source code
Re: How to make Build to Source Code
Posted: August 30th, 2011, 6:05 pm
by fragmer
You can decompile fCraft like you would with any .NET binaries.
See "Decompilers" section on this list. But again, unless you are decompiling modified copy of fCraft, there's no advantage to decompiling it yourself over using the SVN.